BibSonomy :: author  ::

bookmarks

publications

(9)

• Modelling Energy Consumption of an ASIC MPEG-4 Simple Profile Encoder.
  Tong Gan and Kristof Denolf and Gauthier Lafruit and Iole Moccagatta and Antoine Dejonghe and Gregory Lenoir ICME 1922-1925 (2007)
  to dblp by dblp on 2008-08-22 00:00:00
  | URL | BibTeX  
• Cross-layer power management in wireless networks and consequences on system-level architecture
  Bruno Bougard and Sofie Pollin and Antoine Dejonghe and Francky Catthoor and Wim Dehaene Signal Processing 86 1792--1803 (2006)
  to Power management by smicha and 1 other person on 2008-04-23 22:05:04
  | URL | BibTeX  
• Comparison of EM-Based Algorithms for MIMO Channel Estimation.
  X. Wautelet and Cédric Herzet and Antoine Dejonghe and Jérôme Louveaux and Luc Vandendorpe IEEE Transactions on Communications 55 216-226 (2007)
  to dblp by dblp on 2008-02-18 00:00:00
  | URL | BibTeX  
• A Low-Complexity Methodology for Unequal Error Protection of Scalable Images.
  Eric Salemi and Claude Desset and Antoine Dejonghe and Jan Cornelis and Peter Schelkens GLOBECOM (2006)
  to dblp by dblp on 2007-10-30 00:00:00
  | URL | BibTeX  
• Cross-layer power management in wireless networks and consequences on system-level architecture.
  Bruno Bougard and Sofie Pollin and Antoine Dejonghe and Francky Catthoor and Wim Dehaene Signal Processing 86 1792-1803 (2006)
  to dblp by dblp and 1 other person on 2007-03-20 00:00:00
  | URL | BibTeX  
• Bit-interleaved turbo equalization over static frequency-selective channels: constellation mapping impact.
  Antoine Dejonghe and Luc Vandendorpe IEEE Transactions on Communications 52 2061-2065 (2004)
  to dblp by dblp on 2006-08-30 00:00:00
  | URL | BibTeX  
• Optimized NC-toolpath Generation for 5-axis Machining of Complex Surfaces.
  J. P. Kruth and Bert Lauwers and Pieter Dejonghe and J. Dotremont SSM 343-350 (1998)
  to dblp by dblp on 2003-10-14 00:00:00
  | URL | BibTeX  
• Manufacturability of Reverse Engineered CAD-models: A case study.
  J. P. Kruth and A. Kerstens and Pieter Dejonghe SSM 187-195 (1998)
  to dblp by dblp on 2003-10-14 00:00:00
  | URL | BibTeX  
• Optimal and collision free tool posture in five-axis machining through the tight integration of tool path generation and machine simulation.
  Bert Lauwers and Pieter Dejonghe and J. P. Kruth Computer-Aided Design 35 421-432 (2003)
  to dblp by dblp on 2003-09-29 00:00:00
  | URL | BibTeX