The Effect of the Microstructure on Trap-Assisted Recombination and Light Soaking Phenomenon in Hybrid Perovskite Solar Cells
Advanced Functional Materials, (2016)DOI: 10.1002/adfm.201602519
Abstract
Despite the rich experience gained in controlling the microstructure of perovskite films over the past several years, little is known about how the microstructure affects the device properties of perovskite solar cells (HPSCs). In this work, the effects of the perovskite film microstructure on the charge recombination and light-soaking phenomenon in mixed halide HPSCs are investigated. Devices with noncompact perovskite morphology show a severe light soaking effect, with the power conversion efficiency (PCE) improved from 3.7% to 11.6% after light soaking. Devices with compact perovskite morphology show a negligible light soaking effect, with PCE slightly increased from 11.4% to 11.9% after light soaking. From device investigations, photoluminescence, and impedance spectroscopy measurements, it is demonstrated that interface electron traps at the grain boundaries as well as at the crystal surface dominate the light soaking effect. Severe trap-assisted recombination takes place in HPSCs using noncompact films, while it is effectively eliminated in devices with compact films. Moreover, how the grain size of the perovskite film affects the light soaking phenomenon is investigated. In the case of compact perovskite films, the size of the grains has a limited effect on the light soaking. In these compact films, grains are fused and trap states are effectively reduced.