Morphology is critical component to achieve high device performance hybrid perovskite solar cells. Here, we develop a vapor induced intermediate phase (VIP) strategy to manipulate the morphology of perovskite films. By exposing the perovskite precursor films to different saturated solvent vapor atmospheres, e.g., dimethylformamide and dimethylsufoxide, dramatic film morphological evolution occurs, associated with the formation of different intermediate phases. We observe that the crystallization kinetics is significantly altered due to the formation of these intermediate phases, yielding highly crystalline perovskite films with less defect states and high carrier lifetimes. The perovskite solar cells with the reconstructed films exhibits the highest power conversion efficiency (PCE) up to 19.2\% under 1 sun AM 1.5G irradiance, which is among the highest planar heterojunction perovskite solar cells. Also, the perovskite solar cells with VIP processing shows less hysteresis behavior and a stabilized power output over 18\%. Our work opens up a new direction for morphology control through intermediate phase formation, and paves the way toward further enhancing the device performances of perovskite solar cells.
Description
Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases - Journal of the American Chemical Society (ACS Publications)
%0 Journal Article
%1 doi:10.1021/jacs.6b09656
%A Zuo, Lijian
%A Dong, Shiqi
%A De Marco, Nicholas
%A Hsieh, Yao-Tsung
%A Bae, Sang-Hoon
%A Sun, Pengyu
%A Yang, Yang
%D 2016
%J Journal of the American Chemical Society
%K SVA perovskite
%N 48
%P 15710-15716
%R 10.1021/jacs.6b09656
%T Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases
%U http://dx.doi.org/10.1021/jacs.6b09656
%V 138
%X Morphology is critical component to achieve high device performance hybrid perovskite solar cells. Here, we develop a vapor induced intermediate phase (VIP) strategy to manipulate the morphology of perovskite films. By exposing the perovskite precursor films to different saturated solvent vapor atmospheres, e.g., dimethylformamide and dimethylsufoxide, dramatic film morphological evolution occurs, associated with the formation of different intermediate phases. We observe that the crystallization kinetics is significantly altered due to the formation of these intermediate phases, yielding highly crystalline perovskite films with less defect states and high carrier lifetimes. The perovskite solar cells with the reconstructed films exhibits the highest power conversion efficiency (PCE) up to 19.2\% under 1 sun AM 1.5G irradiance, which is among the highest planar heterojunction perovskite solar cells. Also, the perovskite solar cells with VIP processing shows less hysteresis behavior and a stabilized power output over 18\%. Our work opens up a new direction for morphology control through intermediate phase formation, and paves the way toward further enhancing the device performances of perovskite solar cells.
@article{doi:10.1021/jacs.6b09656,
abstract = { Morphology is critical component to achieve high device performance hybrid perovskite solar cells. Here, we develop a vapor induced intermediate phase (VIP) strategy to manipulate the morphology of perovskite films. By exposing the perovskite precursor films to different saturated solvent vapor atmospheres, e.g., dimethylformamide and dimethylsufoxide, dramatic film morphological evolution occurs, associated with the formation of different intermediate phases. We observe that the crystallization kinetics is significantly altered due to the formation of these intermediate phases, yielding highly crystalline perovskite films with less defect states and high carrier lifetimes. The perovskite solar cells with the reconstructed films exhibits the highest power conversion efficiency (PCE) up to 19.2\% under 1 sun AM 1.5G irradiance, which is among the highest planar heterojunction perovskite solar cells. Also, the perovskite solar cells with VIP processing shows less hysteresis behavior and a stabilized power output over 18\%. Our work opens up a new direction for morphology control through intermediate phase formation, and paves the way toward further enhancing the device performances of perovskite solar cells. },
added-at = {2017-02-23T09:10:31.000+0100},
author = {Zuo, Lijian and Dong, Shiqi and De Marco, Nicholas and Hsieh, Yao-Tsung and Bae, Sang-Hoon and Sun, Pengyu and Yang, Yang},
biburl = {https://www.bibsonomy.org/bibtex/2f3f9acaec5eb655441e022921702a867/baumbach},
description = {Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases - Journal of the American Chemical Society (ACS Publications)},
doi = {10.1021/jacs.6b09656},
eprint = {http://dx.doi.org/10.1021/jacs.6b09656},
interhash = {0fab57a56ade701503e1d8f3edcdb132},
intrahash = {f3f9acaec5eb655441e022921702a867},
journal = {Journal of the American Chemical Society},
keywords = {SVA perovskite},
note = {PMID: 27934005},
number = 48,
pages = {15710-15716},
timestamp = {2017-02-23T09:10:31.000+0100},
title = {Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases},
url = {http://dx.doi.org/10.1021/jacs.6b09656},
volume = 138,
year = 2016
}