%0 Journal Article %1 Hohn.Ropp2002 %A Hohn, D. P. %A Ropp, M. E. %D 2002 %J Progress in Photovoltaics: Research and Applications %K Control, Digital MPP electronics power tracking, %N 11 %T Comparative Study of Maximum Power Point Tracking Algorithms %X Maximum power point trackers (MPPTs) play an important role in photovoltaic (PV) power systems because they maximize the power output from a PV system for a given set of conditions, and therefore maximize the array efficiency. Thus, an MPPT can minimize the overall system cost. MPPTs find and maintain operation at the maximum power point, using an MPPT algorithm. Many such algorithms have been proposed. However, one particular algorithm, the perturb-and-observe (P&O) method, claimed by many in the literature to be inferior to others, continues to be by far the most widely used method in commercial PV MPPTs. Part of the reason for this is that the published comparisons between methods do not include an experimental comparison between multiple algorithms with all algorithms optimized and a standardized MPPT hardware. This paper provides such a comparison. MPPT algorithm performance is quantified through the MPPT efficiency. In this work, results are obtained for three optimized algorithms, using a microprocessor-controlled MPPT operating from a PV array and also a PV array simulator. It is found that the P&O method, when properly optimized, can have MPPTefficiencies well in excess of 97%, and is highly competitive against other MPPT algorithms

@article{Hohn.Ropp2002, abstract = {Maximum power point trackers (MPPTs) play an important role in photovoltaic (PV) power systems because they maximize the power output from a PV system for a given set of conditions, and therefore maximize the array efficiency. Thus, an MPPT can minimize the overall system cost. MPPTs find and maintain operation at the maximum power point, using an MPPT algorithm. Many such algorithms have been proposed. However, one particular algorithm, the perturb-and-observe (P\&O) method, claimed by many in the literature to be inferior to others, continues to be by far the most widely used method in commercial PV MPPTs. Part of the reason for this is that the published comparisons between methods do not include an experimental comparison between multiple algorithms with all algorithms optimized and a standardized MPPT hardware. This paper provides such a comparison. MPPT algorithm performance is quantified through the MPPT efficiency. In this work, results are obtained for three optimized algorithms, using a microprocessor-controlled MPPT operating from a PV array and also a PV array simulator. It is found that the P\&O method, when properly optimized, can have MPPTefficiencies well in excess of 97%, and is highly competitive against other MPPT algorithms}, added-at = {2011-09-01T13:26:03.000+0200}, author = {Hohn, D. P. and Ropp, M. E.}, biburl = {https://www.bibsonomy.org/bibtex/20f92f146effbde44685235442dddb3bd/procomun}, file = {Hohn.Ropp2002.pdf:Hohn.Ropp2002.pdf:PDF}, interhash = {ed4616cd71bf59fd476821cb13196a6a}, intrahash = {0f92f146effbde44685235442dddb3bd}, journal = {Progress in Photovoltaics: Research and Applications}, keywords = {Control, Digital MPP electronics power tracking,}, number = 11, owner = {oscar}, refid = {Hohn.Ropp2002}, timestamp = {2011-09-02T08:25:25.000+0200}, title = {Comparative Study of Maximum Power Point Tracking Algorithms}, year = 2002 }