https://www.bibsonomy.org/user/lystrata/administrationBibSonomy RSS Feed for /user/lystrata/administrationTo perform a remote backup, you may perform following tar/ssh command to execute it. For our illustration, let's make a backup of users' home directories located in /home partition. % (cd /homehttp://www.topwebhosts.org/articles/remote-backup-tar-ssh-cron.phplystrata2009-10-09T23:12:07+02:00administration remote ssh tar unix <span itemprop="description">To perform a remote backup, you may perform following tar/ssh command to execute it. For our illustration, let&#039;s make a backup of users&#039; home directories located in /home partition. % (cd /home</span>This section describes how to set up complete replication of a MySQL server. There are a number of different methods for setting up replication, and the exact method that you use will depend on how you are setting up replication, and whether you already have data within your master database. There are some generic tasks whihttp://dev.mysql.com/doc/refman/5.0/en/replication-howto.htmllystrata2009-10-09T19:11:57+02:00administration mysql <span itemprop="description">This section describes how to set up complete replication of a MySQL server. There are a number of different methods for setting up replication, and the exact method that you use will depend on how you are setting up replication, and whether you already have data within your master database. There are some generic tasks whi</span>Growing a disk with vmware-vdiskmanagerhttp://communities.vmware.com/thread/26747lystrata2009-07-30T17:52:06+02:00administration disk sparse vmware <span itemprop="description">Growing a disk with vmware-vdiskmanager</span>http://administratosphere.wordpress.com/2009/07/03/using-synergy-trips-and-trapslystrata2009-07-05T20:32:28+02:00TipsTricks administration keyboard kvm screen synergy tips <a itemprop="url" data-versiondate="2009-07-05T20:32:28+02:00" href="http://administratosphere.wordpress.com/2009/07/03/using-synergy-trips-and-traps" rel="nofollow" class="description-link">http://administratosphere.wordpress.com/2009/07/03/using-synergy-trips-and-traps</a>Software Requirements In order to run the applications in the JChem package Java Virtual Machine version 1.4.2 or later has to be installed. JChemManager (jcman) has more requirements. See the Administration Guide for details. Setting Environmental Variables Some environmental variables should be set manually. How to set environment variables ? Windows: Under Windows these variables can be set from the Control Panel. For example in the case of Windows XP: Start menu -> Control panel -> System-> Advanced -> Environment variables After changing the environment variables a new console (Command Prompt) should be opened so the changes can take effect. To check the current setting of an environment variables, type "set" in the console. To print a specific variable type "echo %VARIABLE_NAME%".http://www.chemaxon.com/jchem/doc/admin/prepscripts.htmllystrata2009-04-07T01:36:04+02:00administration chemaxon jchem <span itemprop="description">Software Requirements In order to run the applications in the JChem package Java Virtual Machine version 1.4.2 or later has to be installed. JChemManager (jcman) has more requirements. See the Administration Guide for details. Setting Environmental Variables Some environmental variables should be set manually. How to set environment variables ? Windows: Under Windows these variables can be set from the Control Panel. For example in the case of Windows XP: Start menu -&gt; Control panel -&gt; System-&gt; Advanced -&gt; Environment variables After changing the environment variables a new console (Command Prompt) should be opened so the changes can take effect. To check the current setting of an environment variables, type &#034;set&#034; in the console. To print a specific variable type &#034;echo %VARIABLE_NAME%&#034;.</span>The Administration Guide of JChem provides background information about the administration of structure tables in relational databases using JChemManager. It contains information about table creation, importing and exporting structure files.http://www.chemaxon.com/jchem/doc/admin/index.htmllystrata2009-04-07T01:28:39+02:00administration chemaxon java jchem <span itemprop="description">The Administration Guide of JChem provides background information about the administration of structure tables in relational databases using JChemManager. It contains information about table creation, importing and exporting structure files.</span>You Want The Func ¶ * Have you ever tried to command or query a large number of systems with SSH? Have you wanted a better way? * Have you wanted a way to audit all of your remote commands on all of your systems? * Tired of writing shell scripts and parsing command output? * Are you fed up with CIM, WBEM, and complicated communication systems that prevent you from doing /real/ work? * Well have we got a solution for you. It's Func.https://fedorahosted.org/funclystrata2009-02-12T11:33:42+01:00administration automation cluster linux python sysadmin <span itemprop="description">You Want The Func ¶ * Have you ever tried to command or query a large number of systems with SSH? Have you wanted a better way? * Have you wanted a way to audit all of your remote commands on all of your systems? * Tired of writing shell scripts and parsing command output? * Are you fed up with CIM, WBEM, and complicated communication systems that prevent you from doing /real/ work? * Well have we got a solution for you. It&#039;s Func.</span>Network ports With a Splunk Enterprise license, you can enable input on any TCP or UDP port. Splunk consumes any data sent on these ports. TCP is the protocol underlying Splunk's data distribution, which is the recommended method for sending data from any remote machine to your Splunk server. Important: In version 3.3.3 of Splunk, default syslog processing via UDP does not correctly handle line-breaks. To work around this issue, add _linebreaker = _linebreaker to the UDP stanza in $SPLUNK_HOME/etc/system/local/inputs.conf. This issue was resolved in 3.3.4.http://www.splunk.com/doc/3.4.2/admin/NetworkPortslystrata2008-12-03T08:05:42+01:00administration linux monitoring splunk <span itemprop="description">Network ports With a Splunk Enterprise license, you can enable input on any TCP or UDP port. Splunk consumes any data sent on these ports. TCP is the protocol underlying Splunk&#039;s data distribution, which is the recommended method for sending data from any remote machine to your Splunk server. Important: In version 3.3.3 of Splunk, default syslog processing via UDP does not correctly handle line-breaks. To work around this issue, add _linebreaker = _linebreaker to the UDP stanza in $SPLUNK_HOME/etc/system/local/inputs.conf. This issue was resolved in 3.3.4.</span>Webmin's ISP Servicehttp://www.virtualmin.com/lystrata2008-10-18T22:09:23+02:00administration virtualmin webmin <span itemprop="description">Webmin&#039;s ISP Service</span>Open Source cross platform inventoryhttp://www.ocsinventory-ng.org/lystrata2008-10-15T16:43:55+02:00Helpdesk administration configuration free hardware inventory management monitoring opensource tools <span itemprop="description">Open Source cross platform inventory</span>Using Xen for High Availability Clustershttp://www.onlamp.com/pub/a/onlamp/2008/02/05/using-xen-for-high-availabilty-clusters.htmllystrata2008-07-18T00:41:39+02:00administration architecture cluster clustering clusters configuration howto linux scalability sysadmin virtualization xen <span itemprop="description">Using Xen for High Availability Clusters</span>init script for vncreflector I threw together. It's a hacked up copy of the init script for vncserver. Ideally, it would handle multiple instances of vncreflector like the vncserver init script does, but that will have to wait until I have some more timhttp://www.eenetworks.com/blog/2007/12/init-script-for-vncreflector.htmllystrata2008-05-27T21:33:43+02:00administration boot linux vnc <span itemprop="description">init script for vncreflector I threw together. It&#039;s a hacked up copy of the init script for vncserver. Ideally, it would handle multiple instances of vncreflector like the vncserver init script does, but that will have to wait until I have some more tim</span>SKINNY ELEPHANTS ( Or: If All Else Fails )http://www.brunolinux.com/01-First_Things_To_Know/Skinny_Elephants.htmllystrata2008-04-17T17:31:11+02:00administration linux <span itemprop="description">SKINNY ELEPHANTS ( Or: If All Else Fails )</span>File Synchronization with Unisonhttp://www.linuxjournal.com/article/7712lystrata2008-03-06T09:08:13+01:00administration automation backup fileshare howto sync unison unix <span itemprop="description">File Synchronization with Unison</span>PrePackaged stacks for OS Xhttp://bitnami.org/lystrata2008-03-03T23:16:30+01:00administration applications apps framework freeware installation opensource software web <span itemprop="description">PrePackaged stacks for OS X</span>Linux-Unix cheat sheets - The ultimate collectionhttp://www.scottklarr.com/topic/115/linux-unix-cheat-sheets---the-ultimate-collection/lystrata2008-02-10T21:26:50+01:00administration cheat cheatsheet linux unix <span itemprop="description">Linux-Unix cheat sheets - The ultimate collection</span>"single service" administrative structure for, among other things, Information and Communication Technology (ICT) across the University.http://tsunews.blogspot.com/2007_06_01_archive.htmllystrata2008-02-01T00:45:47+01:00administration it university <span itemprop="description">&#034;single service&#034; administrative structure for, among other things, Information and Communication Technology (ICT) across the University.</span>Reporting projects on SourceForgehttp://freshmeat.net/browse/245/lystrata2008-01-16T20:28:36+01:00administration logs syslog <span itemprop="description">Reporting projects on SourceForge</span>Why ZFS for homehttp://uadmin.blogspot.com/2006/05/why-zfs-for-home.htmllystrata2008-01-14T12:31:25+01:00administration apple filesystem solaris unix zfs <span itemprop="description">Why ZFS for home</span>Cluster SSH opens terminal windows with connections to specified hosts and an administration console. Any text typed into the administration console is replicated to all other connected and active windows. This tool is intended for, but not limited to, clhttp://www.debianadmin.com/ssh-on-multiple-servers-using-cluster-ssh.htmllystrata2008-01-10T02:37:25+01:00administration cluster ssh <span itemprop="description">Cluster SSH opens terminal windows with connections to specified hosts and an administration console. Any text typed into the administration console is replicated to all other connected and active windows. This tool is intended for, but not limited to, cl</span>