%0 Journal Article %1 Psiaki2005 %A Psiaki, M. L. %A Powell, S. P. %A Jung, H. %A Kintner, P. M. %D 2005 %J IEEE Trans. on Microwave Theory and Techniques %K GPS, frontEnd, sampling, softwareReceiver %N 10 %P 3082-3089 %T Design and Practical Implementation of Multi-Frequency RF Front Ends Using Direct RF Sampling Proc. of the ION GPS/GNSS Conf. %V 53 %X The use of direct RF sampling has been explored as a means of designing multifrequency RF front ends. Such front ends will be useful to multifrequency RF applications such as global navigation satellite system receivers that use global positioning system (GPS) L1, L2, and L5 signals and Galileo signals. The design of a practical multifrequency direct RF sampling front end is dependent on having an analog-to-digital converter whose input bandwidth accommodates the highest carrier frequency and whose maximum sampling frequency is more than twice the cumulative bandwidth about the multiple carrier signals. The principle of direct RF sampling is used to alias all frequency bands of interest onto portions of the Nyquist bandwidth that do not overlap. This paper presents a new algorithm that finds the minimum sampling frequency that avoids overlap. This design approach requires a multifrequency bandpass filter for the frequency bands of interest. A prototype front end has been designed, built, and tested. It receives a GPS coarse/acquisition code at the L1 frequency and GPS antispoofing precision code at both L1 and L2. Dual-frequency signals with received carrier-to-noise ratios in excess of 52 dB-Hz have been acquired and tracked using this system.

@article{Psiaki2005, abstract = {The use of direct RF sampling has been explored as a means of designing multifrequency RF front ends. Such front ends will be useful to multifrequency RF applications such as global navigation satellite system receivers that use global positioning system (GPS) L1, L2, and L5 signals and Galileo signals. The design of a practical multifrequency direct RF sampling front end is dependent on having an analog-to-digital converter whose input bandwidth accommodates the highest carrier frequency and whose maximum sampling frequency is more than twice the cumulative bandwidth about the multiple carrier signals. The principle of direct RF sampling is used to alias all frequency bands of interest onto portions of the Nyquist bandwidth that do not overlap. This paper presents a new algorithm that finds the minimum sampling frequency that avoids overlap. This design approach requires a multifrequency bandpass filter for the frequency bands of interest. A prototype front end has been designed, built, and tested. It receives a GPS coarse/acquisition code at the L1 frequency and GPS antispoofing precision code at both L1 and L2. Dual-frequency signals with received carrier-to-noise ratios in excess of 52 dB-Hz have been acquired and tracked using this system.}, added-at = {2011-05-30T10:41:10.000+0200}, author = {Psiaki, M. L. and Powell, S. P. and Jung, H. and Kintner, P. M.}, biburl = {https://www.bibsonomy.org/bibtex/2c6ddb89a2d7e64760d0063cdbb0798e9/bmuth}, groups = {private}, interhash = {7b7e7615875d24788ddc58e6cd5b7d27}, intrahash = {c6ddb89a2d7e64760d0063cdbb0798e9}, journal = {IEEE Trans. on Microwave Theory and Techniques}, keywords = {GPS, frontEnd, sampling, softwareReceiver}, month = {October}, number = 10, owner = {bmuth}, pages = {3082-3089}, timestamp = {2014-08-11T22:37:44.000+0200}, title = {{Design and Practical Implementation of Multi-Frequency RF Front Ends Using Direct RF Sampling} Proc. of the ION GPS/GNSS Conf.}, username = {bmuth}, volume = 53, year = 2005 }