%0 Conference Paper %1 PrTeIfDmKo2020-MASCOTS-GroupEncryption %A Prantl, Thomas %A Ten, Peter %A Iffländer, Lukas %A Dmitrenko, Alexandra %A Kounev, Samuel %A Krupitzer, Christian %B 2020 IEEE 28th International Symposium on Modeling, Analysis, and Simulation of Computer and Telecommunication Systems (MASCOTS) %D 2020 %K %T Evaluating the Performance of a State-of-the-Art Group-oriented Encryption Scheme for Dynamic Groups in an IoT Scenario %X New emerging technologies, such as autonomous driving, intelligent buildings, and smart cities, are promising to revolutionize user experience and offer new services. The world has to undergo large scale deployment of billions of things — cost-efficient intelligent sensors that will be interconnected into extensive networks and will collect and supply data to intelligent algorithms — to make it happen. To date, however, it is challenging to secure such an infrastructure for many-fold reasons, such as resource constraints of things, large scale deployment, manyto-many communication patterns, and dynamically changing communication groups. All these factors rule out most of the state-of-the-art encryption and key-management techniques. Group encryption algorithms are well-suitable for many-tomany communication patterns typical for IoT networks, and many of them can deal with dynamic groups. There are, however, very few constructions that could potentially fulfill the computational and storage constraints of IoT devices while providing sufficient scalability for large networks. The promising candidates, such as construction by Nishat et al. 1, were not evaluated using IoT platforms and under constraints typical for IoT networks. In this paper, we aim to fill this gap and present the evaluation of a state-of-the-art group-oriented encryption scheme by Nishat et al. to identify its applicability to IoT systems. In detail, we provide a measurement workflow, a revised version of the approach, and describe a reproducible hardware testbed. Using this evaluation environment, we analyze the performance of the encryption scheme in a typical IoT scenario from a group member perspective. The results show that all calculation times can be assumed to be constant and are always below 2 seconds. The memory requirement for permanent parameters can also be considered to be constant and are below 8.5 kbit in each case. However, the information that has to be stored temporarily for group updates has turned out to be the bottleneck of the scheme, since their memory requirements increase linearly with the group size.

@inproceedings{PrTeIfDmKo2020-MASCOTS-GroupEncryption, abstract = {New emerging technologies, such as autonomous driving, intelligent buildings, and smart cities, are promising to revolutionize user experience and offer new services. The world has to undergo large scale deployment of billions of things — cost-efficient intelligent sensors that will be interconnected into extensive networks and will collect and supply data to intelligent algorithms — to make it happen. To date, however, it is challenging to secure such an infrastructure for many-fold reasons, such as resource constraints of things, large scale deployment, manyto-many communication patterns, and dynamically changing communication groups. All these factors rule out most of the state-of-the-art encryption and key-management techniques. Group encryption algorithms are well-suitable for many-tomany communication patterns typical for IoT networks, and many of them can deal with dynamic groups. There are, however, very few constructions that could potentially fulfill the computational and storage constraints of IoT devices while providing sufficient scalability for large networks. The promising candidates, such as construction by Nishat et al. [1], were not evaluated using IoT platforms and under constraints typical for IoT networks. In this paper, we aim to fill this gap and present the evaluation of a state-of-the-art group-oriented encryption scheme by Nishat et al. to identify its applicability to IoT systems. In detail, we provide a measurement workflow, a revised version of the approach, and describe a reproducible hardware testbed. Using this evaluation environment, we analyze the performance of the encryption scheme in a typical IoT scenario from a group member perspective. The results show that all calculation times can be assumed to be constant and are always below 2 seconds. The memory requirement for permanent parameters can also be considered to be constant and are below 8.5 kbit in each case. However, the information that has to be stored temporarily for group updates has turned out to be the bottleneck of the scheme, since their memory requirements increase linearly with the group size.}, added-at = {2023-12-13T00:17:20.000+0100}, author = {Prantl, Thomas and Ten, Peter and Iffländer, Lukas and Dmitrenko, Alexandra and Kounev, Samuel and Krupitzer, Christian}, biburl = {https://www.bibsonomy.org/bibtex/2ce9ad578049d782984100f1f21eba254/admin}, booktitle = {2020 IEEE 28th International Symposium on Modeling, Analysis, and Simulation of Computer and Telecommunication Systems (MASCOTS)}, interhash = {61470778c26f2707991bc11dda8a0949}, intrahash = {ce9ad578049d782984100f1f21eba254}, keywords = {}, month = {November}, series = {MASCOTS '20}, timestamp = {2023-12-13T00:17:20.000+0100}, title = {Evaluating the Performance of a State-of-the-Art Group-oriented Encryption Scheme for Dynamic Groups in an IoT Scenario}, year = 2020 }