%0 Journal Article %1 Ribatski2006 %A Ribatski, Gherhardt %A Wojtan, Leszek %A Thome, John R. %D 2006 %J Experimental Thermal and Fluid Science %K 2006 analysis channel coefficient correlation experiment flow heat-transfer pressure-drop two-phase %N 1 %P 1--19 %R 10.1016/j.expthermflusci.2006.01.006 %T An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels %U http://dx.doi.org/10.1016/j.expthermflusci.2006.01.006 %V 31 %X Experimental results for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels were obtained from the literature. The extensive pressure drop database comprises both diabatic and adiabatic results covering eight fluids, mass velocities from 23 to 6000 kg/m2 s and vapor qualities up to 1. These data were carefully analyzed and compared against 12 two-phase frictional pressure drop prediction methods, including both macro- and micro-scale methods. Overall, the methods by Müller-Steinhagen and Heck and by Mishima and Hibiki, as well as the homogenous model, using the two-phase viscosity definition proposed by Cicchitti and coworkers, provide the most accurate predictions. However, they worked poorly at vapor qualities higher than 0.5 where annular, partial dryout and mist flow patterns would be expected. Similarly, a large database for micro-scale flow boiling heat transfer for eleven fluids covering mass velocities from 100 to 800 kg/m2 s, reduced pressures from 0.03 to 0.77 and heat fluxes from 5 to 180 kW/m2 were compared against three recently proposed micro-scale and one well-known macro-scale heat transfer prediction method. Although some heat transfer trends were captured by the methods, in general they poorly predicted the database. This is not surprising since an analysis of the trends of the experimental results revealed large discrepancies between different data sets, even at similar experimental conditions, and no present method could capture such contrasting trends. The study concludes that the 3-zone model proposed by Thome and coworkers based on the transient conduction through an evaporating liquid film seems to be the most promising approach to predict heat transfer coefficients in micro-scale channels but is still not sufficiently developed to use as a general design tool.

@article{Ribatski2006, abstract = {Experimental results for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels were obtained from the literature. The extensive pressure drop database comprises both diabatic and adiabatic results covering eight fluids, mass velocities from 23 to 6000 kg/m2 s and vapor qualities up to 1. These data were carefully analyzed and compared against 12 two-phase frictional pressure drop prediction methods, including both macro- and micro-scale methods. Overall, the methods by Müller-Steinhagen and Heck and by Mishima and Hibiki, as well as the homogenous model, using the two-phase viscosity definition proposed by Cicchitti and coworkers, provide the most accurate predictions. However, they worked poorly at vapor qualities higher than 0.5 where annular, partial dryout and mist flow patterns would be expected. Similarly, a large database for micro-scale flow boiling heat transfer for eleven fluids covering mass velocities from 100 to 800 kg/m2 s, reduced pressures from 0.03 to 0.77 and heat fluxes from 5 to 180 kW/m2 were compared against three recently proposed micro-scale and one well-known macro-scale heat transfer prediction method. Although some heat transfer trends were captured by the methods, in general they poorly predicted the database. This is not surprising since an analysis of the trends of the experimental results revealed large discrepancies between different data sets, even at similar experimental conditions, and no present method could capture such contrasting trends. The study concludes that the 3-zone model proposed by Thome and coworkers based on the transient conduction through an evaporating liquid film seems to be the most promising approach to predict heat transfer coefficients in micro-scale channels but is still not sufficiently developed to use as a general design tool.}, added-at = {2011-01-19T18:07:19.000+0100}, author = {Ribatski, Gherhardt and Wojtan, Leszek and Thome, John R.}, biburl = {https://www.bibsonomy.org/bibtex/22b4fdd59ead9111554f9cc040d2e3f6a/thorade}, description = {ScienceDirect - Experimental Thermal and Fluid Science : An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels}, doi = {10.1016/j.expthermflusci.2006.01.006}, interhash = {034691df3b9f32a8949723541f9a703b}, intrahash = {2b4fdd59ead9111554f9cc040d2e3f6a}, issn = {0894-1777}, journal = {Experimental Thermal and Fluid Science}, keywords = {2006 analysis channel coefficient correlation experiment flow heat-transfer pressure-drop two-phase}, number = 1, pages = {1--19}, timestamp = {2012-11-02T19:51:39.000+0100}, title = {An analysis of experimental data and prediction methods for two-phase frictional pressure drop and flow boiling heat transfer in micro-scale channels}, url = {http://dx.doi.org/10.1016/j.expthermflusci.2006.01.006}, volume = 31, year = 2006 }