The purpose of this research is to find optimal crimping conditions involved in the assembly of composite insulators. To achieve
this goal, a configurable nonlinear numerical model has been designed in order to study three main parameters that characterize the
crimping process: the clearance and the friction coefficient between the rod and the end-fitting, along with the hardness of the fitting.
It was found that the roughness was one of the most sensible parameter implied in the crimping process. Moreover, the ultimate
tensile strength tends to decrease with an increase of clearance. Finally, the end-fitting will deform less since the hardness is high:
the assembly will be weak and premature sliding will occur. Combining the effect of these parameters, experimentally 20% better
results in term of mechanical performance of the composite insulator were obtained.
%0 Journal Article
%1 duriatti2005optimisation
%A Duriatti, D.
%A Beakou, A.
%A Levillain, R.
%D 2005
%J Composite Structures
%K Composite Finite Mechanical Polymer-matrix Pultrusion analysis element properties
%T Optimisation of the crimping process of a metal end-fitting onto
a composite rod
%X The purpose of this research is to find optimal crimping conditions involved in the assembly of composite insulators. To achieve
this goal, a configurable nonlinear numerical model has been designed in order to study three main parameters that characterize the
crimping process: the clearance and the friction coefficient between the rod and the end-fitting, along with the hardness of the fitting.
It was found that the roughness was one of the most sensible parameter implied in the crimping process. Moreover, the ultimate
tensile strength tends to decrease with an increase of clearance. Finally, the end-fitting will deform less since the hardness is high:
the assembly will be weak and premature sliding will occur. Combining the effect of these parameters, experimentally 20% better
results in term of mechanical performance of the composite insulator were obtained.
@article{duriatti2005optimisation,
abstract = {The purpose of this research is to find optimal crimping conditions involved in the assembly of composite insulators. To achieve
this goal, a configurable nonlinear numerical model has been designed in order to study three main parameters that characterize the
crimping process: the clearance and the friction coefficient between the rod and the end-fitting, along with the hardness of the fitting.
It was found that the roughness was one of the most sensible parameter implied in the crimping process. Moreover, the ultimate
tensile strength tends to decrease with an increase of clearance. Finally, the end-fitting will deform less since the hardness is high:
the assembly will be weak and premature sliding will occur. Combining the effect of these parameters, experimentally 20% better
results in term of mechanical performance of the composite insulator were obtained.},
added-at = {2021-03-04T23:35:20.000+0100},
author = {Duriatti, D. and Beakou, A. and Levillain, R.},
biburl = {https://www.bibsonomy.org/bibtex/2a514d725960089999bcc55042a265816/ceps},
interhash = {99a51260b2ddb1f34651c7f58f923828},
intrahash = {a514d725960089999bcc55042a265816},
journal = {Composite Structures},
keywords = {Composite Finite Mechanical Polymer-matrix Pultrusion analysis element properties},
timestamp = {2023-12-21T14:26:20.000+0100},
title = {Optimisation of the crimping process of a metal end-fitting onto
a composite rod},
year = 2005
}