Effect of Machining Input Parameter on the Surface Roughness Quality
A. Singh, and A. Kumar. International Journal of Innovative Science and Modern Engineering (IJISME), 4 (12):
14-18(July 2017)
Abstract
Past few years an increasing interest in the surface finish produced in turning operation to obtain a product of high quality, the new cutting tool materials like high performance ceramics, coated carbides has been seen which have greatly improved machining of several engineering materials. The productivity during manufacturing can be enhanced by reducing machining cost and selecting appropriate machining parameters. The performance of machining process is depends on various parameters like tool geometry parameters, cutting parameters, tool materials, work piece materials. In this research work the effect of different back rake angle along with cutting parameters and speed has been investigated while machining AISI H11 steel with single coated carbide tools.
%0 Journal Article
%1 noauthororeditor
%A Singh, Amninder
%A Kumar, Ashwani
%D 2017
%E Kumar, Dr. Shiv
%J International Journal of Innovative Science and Modern Engineering (IJISME)
%K Coating. Feed Machining Rake Speed Surface angle roughness
%N 12
%P 14-18
%T Effect of Machining Input Parameter on the Surface Roughness Quality
%U https://www.ijisme.org/wp-content/uploads/papers/v4i12/K10450641117.pdf
%V 4
%X Past few years an increasing interest in the surface finish produced in turning operation to obtain a product of high quality, the new cutting tool materials like high performance ceramics, coated carbides has been seen which have greatly improved machining of several engineering materials. The productivity during manufacturing can be enhanced by reducing machining cost and selecting appropriate machining parameters. The performance of machining process is depends on various parameters like tool geometry parameters, cutting parameters, tool materials, work piece materials. In this research work the effect of different back rake angle along with cutting parameters and speed has been investigated while machining AISI H11 steel with single coated carbide tools.
@article{noauthororeditor,
abstract = {Past few years an increasing interest in the surface finish produced in turning operation to obtain a product of high quality, the new cutting tool materials like high performance ceramics, coated carbides has been seen which have greatly improved machining of several engineering materials. The productivity during manufacturing can be enhanced by reducing machining cost and selecting appropriate machining parameters. The performance of machining process is depends on various parameters like tool geometry parameters, cutting parameters, tool materials, work piece materials. In this research work the effect of different back rake angle along with cutting parameters and speed has been investigated while machining AISI H11 steel with single coated carbide tools.},
added-at = {2021-09-17T13:50:53.000+0200},
author = {Singh, Amninder and Kumar, Ashwani},
biburl = {https://www.bibsonomy.org/bibtex/2d926f461f1cc6a231f40d51a2875f6ab/ijisme_beiesp},
editor = {Kumar, Dr. Shiv},
interhash = {4e545cdf342743f0fef3f9ef0c5c06a0},
intrahash = {d926f461f1cc6a231f40d51a2875f6ab},
issn = {2319-6386},
journal = {International Journal of Innovative Science and Modern Engineering (IJISME)},
keywords = {Coating. Feed Machining Rake Speed Surface angle roughness},
language = {En},
month = {July},
number = 12,
pages = {14-18},
timestamp = {2021-09-17T13:50:53.000+0200},
title = {Effect of Machining Input Parameter on the Surface Roughness Quality},
url = {https://www.ijisme.org/wp-content/uploads/papers/v4i12/K10450641117.pdf},
volume = 4,
year = 2017
}