%0 Journal Article %1 Cammi201148 %A Cammi, Antonio %A Casella, Francesco %A Ricotti, Marco E. %A Schiavo, Francesco %D 2011 %J Progress in Nuclear Energy %K 2011 Modelica dynamic nuclear power-plant %N 1 %P 48 - 58 %R 10.1016/j.pnucene.2010.09.004 %T An object-oriented approach to simulation of IRIS dynamic response %U http://dx.doi.org/10.1016/j.pnucene.2010.09.004 %V 53 %X In this paper the development of an adequate modelling and simulation tool for Dynamics and Control tasks is presented. The key features of the developed simulator are: “Modularity” – the system model is built by connecting the models of its components, which are written independently of their boundary conditions; “Openness” – the code of each component model is clearly readable and close to the original equations and easily customised by the experienced user; “Efficiency” – the simulation code is fast; “Tool support” – the simulation tool is based on reliable, tested and well-documented software. To achieve these objectives, the Modelica language was used as a basis for the development of the simulator. The Modelica language is the result of recent advances in the field of object-oriented, multi-physics, dynamic system modelling. The language definition is open-source and it has already been successfully adopted in several industrial fields. The test bed for the application of the object-oriented approach has been the new generation, integral type, IRIS nuclear reactor. IRIS (International Reactor Innovative and Secure) is a pressurized light water cooled, small/medium power (335 MWe) reactor reactor, under development by an international consortium of nineteen organizations from ten countries. The preliminary design has been completed and the pre-application licensing process with the US-Nuclear Regulatory Commission (NRC) is underway. To provide the required capabilities for the analysis, specific models for the nuclear reactor components have been developed, to be applied for the dynamic simulation of the IRIS integral reactor, albeit keeping general validity for PWR plants. The following Modelica models have been written to satisfy the IRIS modelling requirements and are presented in this paper: point reactor kinetic, fuel heat transfer, control rods model, and a once-through type steam generator, thus obtaining a specific library of nuclear models and components. As far as other classical power generation plant components are concerned, the Thermo Power open library, developed at Politecnico di Milano as well, has been adopted and is briefly presented in the paper. Originally conceived for conventional, fossil-fired plants, the highly modular approach allowed to effectively reuse the models of the balance of plant systems, which have been connected to the models of the nuclear power generation process, to obtain a system simulator for the IRIS reactor. Finally, preliminary results of the code validation process and the reactor dynamics are presented.

@article{Cammi201148, abstract = {In this paper the development of an adequate modelling and simulation tool for Dynamics and Control tasks is presented. The key features of the developed simulator are: “Modularity” – the system model is built by connecting the models of its components, which are written independently of their boundary conditions; “Openness” – the code of each component model is clearly readable and close to the original equations and easily customised by the experienced user; “Efficiency” – the simulation code is fast; “Tool support” – the simulation tool is based on reliable, tested and well-documented software. To achieve these objectives, the Modelica language was used as a basis for the development of the simulator. The Modelica language is the result of recent advances in the field of object-oriented, multi-physics, dynamic system modelling. The language definition is open-source and it has already been successfully adopted in several industrial fields. The test bed for the application of the object-oriented approach has been the new generation, integral type, IRIS nuclear reactor. IRIS (International Reactor Innovative and Secure) is a pressurized light water cooled, small/medium power (335 MWe) reactor reactor, under development by an international consortium of nineteen organizations from ten countries. The preliminary design has been completed and the pre-application licensing process with the US-Nuclear Regulatory Commission (NRC) is underway. To provide the required capabilities for the analysis, specific models for the nuclear reactor components have been developed, to be applied for the dynamic simulation of the IRIS integral reactor, albeit keeping general validity for PWR plants. The following Modelica models have been written to satisfy the IRIS modelling requirements and are presented in this paper: point reactor kinetic, fuel heat transfer, control rods model, and a once-through type steam generator, thus obtaining a specific library of nuclear models and components. As far as other classical power generation plant components are concerned, the Thermo Power open library, developed at Politecnico di Milano as well, has been adopted and is briefly presented in the paper. Originally conceived for conventional, fossil-fired plants, the highly modular approach allowed to effectively reuse the models of the balance of plant systems, which have been connected to the models of the nuclear power generation process, to obtain a system simulator for the IRIS reactor. Finally, preliminary results of the code validation process and the reactor dynamics are presented.}, added-at = {2012-09-10T15:58:36.000+0200}, author = {Cammi, Antonio and Casella, Francesco and Ricotti, Marco E. and Schiavo, Francesco}, biburl = {https://www.bibsonomy.org/bibtex/2fe7ec630b9c30d8e34c6ae5c89cc9394/thorade}, description = {ScienceDirect.com - Progress in Nuclear Energy - An object-oriented approach to simulation of IRIS dynamic response}, doi = {10.1016/j.pnucene.2010.09.004}, interhash = {db79e6254fdb013b39f9685e2e39275d}, intrahash = {fe7ec630b9c30d8e34c6ae5c89cc9394}, issn = {0149-1970}, journal = {Progress in Nuclear Energy}, keywords = {2011 Modelica dynamic nuclear power-plant}, number = 1, pages = {48 - 58}, timestamp = {2012-09-10T15:58:36.000+0200}, title = {An object-oriented approach to simulation of IRIS dynamic response}, url = {http://dx.doi.org/10.1016/j.pnucene.2010.09.004}, volume = 53, year = 2011 }