%0 Journal Article %1 Kojima2007 %A Kojima, Takashi %A Suzuki, Rie %A Uekawa, Naofumi %A Kakegawa, Kazuyuki %C 2-22-17 HYAKUNIN-CHO SHINJUKU-KU, TOKYO, 169, JAPAN %D 2007 %I CERAMIC SOC JAPAN-NIPPON SERAMIKKUSU KYOKAI %J JOURNAL OF THE CERAMIC SOCIETY OF JAPAN %K anisotropic; materials particle; porous titania; %N 1338 %P 160-164 %T Fabrication of porous titania using anisotropic particles %V 115 %X Porous materials were prepared by stacking needle-like titania particles. The uniform, needle-like titania particles were synthesized by hydrothermal treatment of titanium hydroxide gel containing ethylenediamine. A seeding technique controlled the particle size of them. The obtained particles were dispersed in aqueous solutions with various pH values and vacuum-filtered to form bulk materials. Porous materials with uniform microstructure were obtained when the pH of the suspension was adjusted to the value suitable for generating electrostatic repulsion between dispersed titania particles. Changing the size of component particles also controlled the pore size of the porous titania.

@article{Kojima2007, __markedentry = {[s0346678]}, abstract = {Porous materials were prepared by stacking needle-like titania particles. The uniform, needle-like titania particles were synthesized by hydrothermal treatment of titanium hydroxide gel containing ethylenediamine. A seeding technique controlled the particle size of them. The obtained particles were dispersed in aqueous solutions with various pH values and vacuum-filtered to form bulk materials. Porous materials with uniform microstructure were obtained when the pH of the suspension was adjusted to the value suitable for generating electrostatic repulsion between dispersed titania particles. Changing the size of component particles also controlled the pore size of the porous titania.}, added-at = {2009-02-13T13:09:53.000+0100}, address = {2-22-17 HYAKUNIN-CHO SHINJUKU-KU, TOKYO, 169, JAPAN}, affiliation = {Kojima, T (Reprint Author), Chiba Univ, Grad Sch Sci \& Technol, Inage Ku, 1-33 Yayoi Cho, Chiba 2638522, Japan. Chiba Univ, Grad Sch Sci \& Technol, Inage Ku, Chiba 2638522, Japan.}, author = {Kojima, Takashi and Suzuki, Rie and Uekawa, Naofumi and Kakegawa, Kazuyuki}, biburl = {https://www.bibsonomy.org/bibtex/20bf4294c93238e99e2c223a44b237624/almailer}, cited-references = {CHEN XB, 1998, POWDER TECHNOL, V99, P171. FAN WG, 2006, CHEM LETT, V35, P670, DOI 10.1246/cl.2006.670. FRYXELL GE, 2006, INORG CHEM COMMUN, V9, P1141, DOI 10.1016/j.inoche.2006.06.012. FUJISHIMA A, 1972, NATURE, V238, P37. GULIANTS VV, 2004, J MEMBRANE SCI, V235, P53, DOI 10.1016/j.memsci.2004.01.019. GUSTAFSSON J, 2003, J COLLOID INTERF SCI, V258, P235, DOI 10.1016/S0021-9797(02)00177-7. HSU JP, 2000, COLLOID SURFACE A, V161, P423. IMHOF A, 1997, NATURE, V389, P948. KAJIHARA K, 1998, J AM CERAM SOC, V81, P2670. KENDALL K, 1989, POWDER TECHNOL, V58, P151. KOBAYASHI S, 1999, CHEM LETT OCT, P1077. KOSMULSKI M, 2002, J COLLOID INTERF SCI, V253, P77, DOI 10.1006/jcis.2002.8490. KOSMULSKI M, 2004, J COLLOID INTERF SCI, V275, P214, DOI 10.1016/j.jcis.2004.02.029. KOSMULSKI M, 2006, J COLLOID INTERF SCI, V298, P730, DOI 10.1016/j.jcis.2006.01.003. LEWIS JA, 2000, J AM CERAM SOC, V83, P2341. LI D, 2003, NANO LETT, V3, P555, DOI 10.1021/nl034039o. NAGAMINE S, 2003, J MATER SCI LETT, V22, P1213. NAGAOKA T, 2005, J CERAM SOC JPN, V113, P87. ORLIN D, 2000, ADV MATER, V12, P531. OZIN GA, 1992, ADV MATER, V4, P612. SCBUTH F, 2002, HDB POROUS SOLIDS. SIGMUND WM, 2000, J AM CERAM SOC, V83, P1557. STUDART AR, 2006, J AM CERAM SOC, V89, P1771, DOI 10.1111/j.1551-2916.2006.01044.x. SUGIMOTO T, 1997, J COLLOID INTERF SCI, V193, P140. SUGIMOTO T, 1998, J DISPER SCI TECHNOL, V19, P143. SUGIMOTO T, 2000, SURFACTANT SCI SERIE, V2. SUGIMOTO T, 2001, MONODISPERSED PARTIC. SUGIMOTO T, 2002, J COLLOID INTERF SCI, V252, P339, DOI 10.1006/jcis.2002.8454. SUGIMOTO T, 2002, J COLLOID INTERF SCI, V252, P347, DOI 10.1006/jcis.2002.8480. SUGIMOTO T, 2003, J COLLOID INTERF SCI, V259, P43, DOI 10.1016/S0021-9797(03)00036-5. SUGIMOTO T, 2003, J COLLOID INTERF SCI, V359, P53. TAKAHASHI M, 2002, KONA, V20, P84. VISWANATHAMURTHI P, 2004, INORG CHEM COMMUN, V7, P679. WANG DY, 2001, CHEM MATER, V13, P364. WOYANSKY JS, 1992, AM CERAM SOC B, V71, P1674. XIA YN, 2000, ADV MATER, V12, P693. YIN S, 2000, IND ENG CHEM RES, V39, P4526.}, description = {Initial Import}, interhash = {6268ea04451a97ed1b7fd1ca6ef3c517}, intrahash = {0bf4294c93238e99e2c223a44b237624}, issn = {0914-5400}, journal = {JOURNAL OF THE CERAMIC SOCIETY OF JAPAN}, keywords = {anisotropic; materials particle; porous titania;}, keywords-plus = {GEL-SOL METHOD; ANATASE TIO2 NANOPARTICLES; ZERO CHARGE; MACROPOROUS TITANIA; COLLOIDAL SPHERES; ADVANCED CERAMICS; POINTS; STABILITY; BEHAVIOR; UPDATE}, month = FEB, number = 1338, owner = {s0346678}, pages = {160-164}, publisher = {CERAMIC SOC JAPAN-NIPPON SERAMIKKUSU KYOKAI}, times-cited = {1}, timestamp = {2009-02-13T13:09:54.000+0100}, title = {Fabrication of porous titania using anisotropic particles}, type = {Article}, unique-id = {ISI:000245023100013}, volume = 115, year = 2007 }