%0 Journal Article %1 Hsieh2002 %A Hsieh, Y. Y. %A Lin, T. F. %D 2002 %J International Journal of Heat and Mass Transfer %K 2002 R410a evaporation experiment flow heat-transfer plate-heat-exchanger pressure-drop %N 5 %P 1033--1044 %R 10.1016/S0017-9310(01)00219-8 %T Saturated flow boiling heat transfer and pressure drop of refrigerant R-410A in a vertical plate heat exchanger %U http://dx.doi.org/10.1016/S0017-9310(01)00219-8 %V 45 %X Saturated flow boiling heat transfer and the associated frictional pressure drop of the ozone friendly refrigerant R-410A (a mixture of 50 wt-\% R-32 and 50 wt-\% R-125) flowing in a vertical plate heat exchanger (PHE) are investigated experimentally in the study. In the experiment two vertical counter flow channels are formed in the exchanger by three plates of commercial geometry with a corrugated sinusoidal shape of a chevron angle of 60°. Upflow boiling of saturated refrigerant R-410A in one channel receives heat from the downflow of hot water in the other channel. The experimental parameters in this study include the refrigerant R-410A mass flux ranging from 50 to 125 kg/m2 s and imposed heat flux from 5 to 35 kW/m2 for the system pressure fixed at 1.08, 1.25 and 1.44 MPa, which respectively correspond to the saturated temperatures of 10, 15 and 20 °C. The measured data showed that both the boiling heat transfer coefficient and frictional pressure drop increase almost linearly with the imposed heat flux. Furthermore, the refrigerant mass flux exhibits significant effect on the saturated flow boiling heat transfer coefficient only at higher imposed heat flux. For a rise of the refrigerant pressure from 1.08 to 1.44 MPa, the frictional pressure drops are found to be lower to a noticeable degree. However, the refrigerant pressure has very slight influences on the saturated flow boiling heat transfer coefficient. Finally, empirical correlations are proposed to correlate the present data for the saturated boiling heat transfer coefficients and friction factor in terms of the Boiling number and equivalent Reynolds number.

@article{Hsieh2002, abstract = {Saturated flow boiling heat transfer and the associated frictional pressure drop of the ozone friendly refrigerant R-410A (a mixture of 50 wt-\% R-32 and 50 wt-\% R-125) flowing in a vertical plate heat exchanger (PHE) are investigated experimentally in the study. In the experiment two vertical counter flow channels are formed in the exchanger by three plates of commercial geometry with a corrugated sinusoidal shape of a chevron angle of 60°. Upflow boiling of saturated refrigerant R-410A in one channel receives heat from the downflow of hot water in the other channel. The experimental parameters in this study include the refrigerant R-410A mass flux ranging from 50 to 125 kg/m2 s and imposed heat flux from 5 to 35 kW/m2 for the system pressure fixed at 1.08, 1.25 and 1.44 MPa, which respectively correspond to the saturated temperatures of 10, 15 and 20 °C. The measured data showed that both the boiling heat transfer coefficient and frictional pressure drop increase almost linearly with the imposed heat flux. Furthermore, the refrigerant mass flux exhibits significant effect on the saturated flow boiling heat transfer coefficient only at higher imposed heat flux. For a rise of the refrigerant pressure from 1.08 to 1.44 MPa, the frictional pressure drops are found to be lower to a noticeable degree. However, the refrigerant pressure has very slight influences on the saturated flow boiling heat transfer coefficient. Finally, empirical correlations are proposed to correlate the present data for the saturated boiling heat transfer coefficients and friction factor in terms of the Boiling number and equivalent Reynolds number.}, added-at = {2011-01-19T18:06:22.000+0100}, author = {Hsieh, Y. Y. and Lin, T. F.}, biburl = {https://www.bibsonomy.org/bibtex/2503c68533c2e6c77d8cc936e6e1c353d/thorade}, description = {ScienceDirect - International Journal of Heat and Mass Transfer : Saturated flow boiling heat transfer and pressure drop of refrigerant R-410A in a vertical plate heat exchanger}, doi = {10.1016/S0017-9310(01)00219-8}, interhash = {856fb259fb947f70c170dd9c0502baa3}, intrahash = {503c68533c2e6c77d8cc936e6e1c353d}, issn = {0017-9310}, journal = {International Journal of Heat and Mass Transfer}, keywords = {2002 R410a evaporation experiment flow heat-transfer plate-heat-exchanger pressure-drop}, number = 5, pages = {1033--1044}, timestamp = {2012-11-04T19:09:09.000+0100}, title = {Saturated flow boiling heat transfer and pressure drop of refrigerant R-410A in a vertical plate heat exchanger}, url = {http://dx.doi.org/10.1016/S0017-9310(01)00219-8}, volume = 45, year = 2002 }