Abstract
Controlling power flow in modern power systems
can be made more flexible by the use of recent developments
in power electronic and computing control technology. The
Unified Power Flow Controller (UPFC) is a Flexible AC
transmission system (FACTS) device that can control all the
three system variables namely line reactance, magnitude and
phase angle difference of voltage across the line. The UPFC
provides a promising means to control power flow in modern
power systems. Essentially the performance depends on proper
control setting achievable through a power flow analysis
program. This paper presents a reliable method to meet the
requirements by developing a Newton-Raphson based load
flow calculation through which control settings of UPFC can
be determined for the pre-specified power flow between the
lines. The proposed method keeps Newton-Raphson Load Flow
(NRLF) algorithm intact and needs (little modification in the
Jacobian matrix). A MATLAB program has been developed to
calculate the control settings of UPFC and the power flow
between the lines after the load flow is converged. Case studies
have been performed on IEEE 5-bus system and 14-bus system
to show that the proposed method is effective. These studies
indicate that the method maintains the basic NRLF properties
such as fast computational speed, high degree of accuracy and
good convergence rate.
Users
Please
log in to take part in the discussion (add own reviews or comments).