Thin-film solar cells suffer from various types of recombination, of which leakage current usually dominates at lower voltages. Herein, we demonstrate first a three-order reduction of the shunt loss mechanism in planar methylammonium lead iodide perovskite solar cells by replacing the commonly used hole transport layer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with a better hole-selective polyarylamine. As a result, these cells exhibit superior operation under reduced light conditions, which we demonstrate for the extreme case of moonlight irradiance, at which open-circuit voltages of 530 mV can still be obtained. By the shunt removal we also observe the VOC to drop to zero after as long as 2 h after the light has been switched off. Second, at higher illumination intensities the dominant losses in the PEDOT:PSS-based cell are ascribed to surface recombination and are also proven to be substantially minimized by instead employing the polyarylamine. We attribute the reduced shunt and surface recombination to the far better suited semiconductor character of the polyarylamine, compared to that of PEDOT:PSS, efficiently blocking electrons from recombining at this electrode.
%0 Journal Article
%1 doi:10.1021/acsenergylett.6b00719
%A Tvingstedt, Kristofer
%A Gil-Escrig, Lidón
%A Momblona, Cristina
%A Rieder, Philipp
%A Kiermasch, David
%A Sessolo, Michele
%A Baumann, Andreas
%A Bolink, Henk J.
%A Dyakonov, Vladimir
%D 2017
%J ACS Energy Letters
%K perovskite recombination surface
%N 2
%P 424-430
%R 10.1021/acsenergylett.6b00719
%T Removing Leakage and Surface Recombination in Planar Perovskite Solar Cells
%U http://dx.doi.org/10.1021/acsenergylett.6b00719
%V 2
%X Thin-film solar cells suffer from various types of recombination, of which leakage current usually dominates at lower voltages. Herein, we demonstrate first a three-order reduction of the shunt loss mechanism in planar methylammonium lead iodide perovskite solar cells by replacing the commonly used hole transport layer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with a better hole-selective polyarylamine. As a result, these cells exhibit superior operation under reduced light conditions, which we demonstrate for the extreme case of moonlight irradiance, at which open-circuit voltages of 530 mV can still be obtained. By the shunt removal we also observe the VOC to drop to zero after as long as 2 h after the light has been switched off. Second, at higher illumination intensities the dominant losses in the PEDOT:PSS-based cell are ascribed to surface recombination and are also proven to be substantially minimized by instead employing the polyarylamine. We attribute the reduced shunt and surface recombination to the far better suited semiconductor character of the polyarylamine, compared to that of PEDOT:PSS, efficiently blocking electrons from recombining at this electrode.
@article{doi:10.1021/acsenergylett.6b00719,
abstract = { Thin-film solar cells suffer from various types of recombination, of which leakage current usually dominates at lower voltages. Herein, we demonstrate first a three-order reduction of the shunt loss mechanism in planar methylammonium lead iodide perovskite solar cells by replacing the commonly used hole transport layer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with a better hole-selective polyarylamine. As a result, these cells exhibit superior operation under reduced light conditions, which we demonstrate for the extreme case of moonlight irradiance, at which open-circuit voltages of 530 mV can still be obtained. By the shunt removal we also observe the VOC to drop to zero after as long as 2 h after the light has been switched off. Second, at higher illumination intensities the dominant losses in the PEDOT:PSS-based cell are ascribed to surface recombination and are also proven to be substantially minimized by instead employing the polyarylamine. We attribute the reduced shunt and surface recombination to the far better suited semiconductor character of the polyarylamine, compared to that of PEDOT:PSS, efficiently blocking electrons from recombining at this electrode. },
added-at = {2017-02-10T12:45:32.000+0100},
author = {Tvingstedt, Kristofer and Gil-Escrig, Lidón and Momblona, Cristina and Rieder, Philipp and Kiermasch, David and Sessolo, Michele and Baumann, Andreas and Bolink, Henk J. and Dyakonov, Vladimir},
biburl = {https://www.bibsonomy.org/bibtex/2726524f13b6863034db30736af2f13ec/fabianopkm},
doi = {10.1021/acsenergylett.6b00719},
eprint = {http://dx.doi.org/10.1021/acsenergylett.6b00719},
interhash = {3a83202b482077e1349147ac03f0ee67},
intrahash = {726524f13b6863034db30736af2f13ec},
journal = {ACS Energy Letters},
keywords = {perovskite recombination surface},
number = 2,
pages = {424-430},
timestamp = {2017-02-10T12:45:32.000+0100},
title = {Removing Leakage and Surface Recombination in Planar Perovskite Solar Cells},
url = {http://dx.doi.org/10.1021/acsenergylett.6b00719},
volume = 2,
year = 2017
}