%0 Conference Paper %1 9469801 %A Tan, Deck Khong %A Nokhodchi, Ali %A Münzenrieder, Niko %B 2021 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS) %D 2021 %K myown %P 1-4 %R 10.1109/FLEPS51544.2021.9469801 %T Fabrication of Flexible and Transferable RTDs via Fused Deposition Modelling 3D Printing %U https://ieeexplore.ieee.org/document/9469801/ %X Fused Deposition Modelling (FDM) 3D printing is a simple and cost-effective manufacturing method. This study investigates the capabilities of using FDM 3D printing to produce simple Resistance Temperature Detectors (RTDs) as temperature sensors. Two types of conductive PLA filaments were used: carbon black (CB) and graphene PLA filaments. The CB and graphene PLA sensors showed conductance of 0.0238 mS and 0.1042 mS respectively. When measuring the response of the sensors against a change in temperature ranging from 15 °C to 80 °C, the CB PLA sensor showed a sensitivity of 0.01416 ± 0.00004 °C-1 whereas the graphene PLA sensor had a sensitivity of 0.00498 ± 0.00004 °C-1. The 3D printed temperatures sensors showed good flexibility and stability, even after being transferred to different substrates.

@inproceedings{9469801, abstract = {Fused Deposition Modelling (FDM) 3D printing is a simple and cost-effective manufacturing method. This study investigates the capabilities of using FDM 3D printing to produce simple Resistance Temperature Detectors (RTDs) as temperature sensors. Two types of conductive PLA filaments were used: carbon black (CB) and graphene PLA filaments. The CB and graphene PLA sensors showed conductance of 0.0238 mS and 0.1042 mS respectively. When measuring the response of the sensors against a change in temperature ranging from 15 °C to 80 °C, the CB PLA sensor showed a sensitivity of 0.01416 ± 0.00004 °C-1 whereas the graphene PLA sensor had a sensitivity of 0.00498 ± 0.00004 °C-1. The 3D printed temperatures sensors showed good flexibility and stability, even after being transferred to different substrates.}, added-at = {2023-05-22T12:28:43.000+0200}, author = {Tan, Deck Khong and Nokhodchi, Ali and Münzenrieder, Niko}, biburl = {https://www.bibsonomy.org/bibtex/2dbe643a991ebe236d4146064d3effbb9/nikomu}, booktitle = {2021 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS)}, doi = {10.1109/FLEPS51544.2021.9469801}, interhash = {5b8e27b1e0c5eb443234e8cd9f3f512d}, intrahash = {dbe643a991ebe236d4146064d3effbb9}, keywords = {myown}, month = {June}, pages = {1-4}, timestamp = {2023-05-22T12:28:43.000+0200}, title = {Fabrication of Flexible and Transferable RTDs via Fused Deposition Modelling 3D Printing}, url = {https://ieeexplore.ieee.org/document/9469801/}, year = 2021 }