%0 Journal Article %1 kim2010nanopattern %A Kim, S H %A Jeong, J H %A Youn, J R %D 2010 %J Nanotechnology %K methods molding nextgen topography %N 20 %P 205302 %T Nanopattern insert molding %U http://stacks.iop.org/0957-4484/21/i=20/a=205302 %V 21 %X A new method was investigated to produce nanopatterns on polymeric surfaces with high resolution, good productivity, and low cost. It has certain advantages when compared with such conventional techniques as nanoimprint lithography (NIL), hot embossing, and injection molding. Polyvinyl alcohol (PVA) was utilized for preparation of the stamp with nanopatterns on its surface. The nanoimprinted PVA film was inserted into the cavity and the polymer melt was injected into the mold. Nanopatterns with pillars smaller than 100 nm were produced on the polymeric surface. The water soluble PVA film was used as the inserted template to overcome the difficulties of releasing the nanopatterned film from the substrate.

@article{kim2010nanopattern, abstract = {A new method was investigated to produce nanopatterns on polymeric surfaces with high resolution, good productivity, and low cost. It has certain advantages when compared with such conventional techniques as nanoimprint lithography (NIL), hot embossing, and injection molding. Polyvinyl alcohol (PVA) was utilized for preparation of the stamp with nanopatterns on its surface. The nanoimprinted PVA film was inserted into the cavity and the polymer melt was injected into the mold. Nanopatterns with pillars smaller than 100 nm were produced on the polymeric surface. The water soluble PVA film was used as the inserted template to overcome the difficulties of releasing the nanopatterned film from the substrate.}, added-at = {2016-10-21T14:59:17.000+0200}, author = {Kim, S H and Jeong, J H and Youn, J R}, biburl = {https://www.bibsonomy.org/bibtex/2d628e796de4b3b677d8eebad22fc8f86/bkoch}, description = {Nanopattern insert molding - IOPscience}, interhash = {23dca0998c4f2c0d3380ba8af5f69efc}, intrahash = {d628e796de4b3b677d8eebad22fc8f86}, journal = {Nanotechnology}, keywords = {methods molding nextgen topography}, number = 20, pages = 205302, timestamp = {2016-10-21T14:59:17.000+0200}, title = {Nanopattern insert molding}, url = {http://stacks.iop.org/0957-4484/21/i=20/a=205302}, volume = 21, year = 2010 }