A Microstrip Patch Antenna is a type of radio antenna with a low profile, which can be mounted on a low
surface. It is a narrow band, wide-beam fed antenna fabricated by etching the antenna element pattern in
metal trace bonded to the dielectric Substrate such as a printed circuit board with a continuous metal layer
bonded to the opposite side of the substrate which forms a ground plane. The main aim of this work is to
design, develop and test the Printed Circuit antenna (Microstrip Patch antenna) suitable for use in L-band
frequency range of 1-2GHz. This study also emphasizes on simulation of micro-strip patch antenna using
IE3D software to simulate & study the radiation pattern & other radiation pattern parameters and
comparison with specifications/requirements. Co-axial Feed technique was adopted and the location of the
feed point was varied within the radiating patch to arrive at the point of minimum return loss. This work is
also focused on characterization of fabricated antenna in view of parameters like VSWR, Antenna
efficiency, Axial ratio, Gain and radiation pattern.
%0 Journal Article
%1 Bainbridge83automatica
%A Sudarsan, Aishwarya
%A Prabhu, Apeksha
%D 2017
%J International Journal of Antennas (JANT)
%K Antenna Co-axial Microstrip Patch Pattern VSWR adiation feed
%N 1/2/3
%P 1-12
%R 10.5121/jant.2017.3301
%T DESIGN AND DEVELOPMENT OF MICROSTRIP
PATCH ANTENNA
%U https://airccse.com/jant/papers/3317jant01.pdf
%V 3
%X A Microstrip Patch Antenna is a type of radio antenna with a low profile, which can be mounted on a low
surface. It is a narrow band, wide-beam fed antenna fabricated by etching the antenna element pattern in
metal trace bonded to the dielectric Substrate such as a printed circuit board with a continuous metal layer
bonded to the opposite side of the substrate which forms a ground plane. The main aim of this work is to
design, develop and test the Printed Circuit antenna (Microstrip Patch antenna) suitable for use in L-band
frequency range of 1-2GHz. This study also emphasizes on simulation of micro-strip patch antenna using
IE3D software to simulate & study the radiation pattern & other radiation pattern parameters and
comparison with specifications/requirements. Co-axial Feed technique was adopted and the location of the
feed point was varied within the radiating patch to arrive at the point of minimum return loss. This work is
also focused on characterization of fabricated antenna in view of parameters like VSWR, Antenna
efficiency, Axial ratio, Gain and radiation pattern.
@article{Bainbridge83automatica,
abstract = {A Microstrip Patch Antenna is a type of radio antenna with a low profile, which can be mounted on a low
surface. It is a narrow band, wide-beam fed antenna fabricated by etching the antenna element pattern in
metal trace bonded to the dielectric Substrate such as a printed circuit board with a continuous metal layer
bonded to the opposite side of the substrate which forms a ground plane. The main aim of this work is to
design, develop and test the Printed Circuit antenna (Microstrip Patch antenna) suitable for use in L-band
frequency range of 1-2GHz. This study also emphasizes on simulation of micro-strip patch antenna using
IE3D software to simulate & study the radiation pattern & other radiation pattern parameters and
comparison with specifications/requirements. Co-axial Feed technique was adopted and the location of the
feed point was varied within the radiating patch to arrive at the point of minimum return loss. This work is
also focused on characterization of fabricated antenna in view of parameters like VSWR, Antenna
efficiency, Axial ratio, Gain and radiation pattern.
},
added-at = {2024-05-07T07:44:23.000+0200},
author = {Sudarsan, Aishwarya and Prabhu, Apeksha},
biburl = {https://www.bibsonomy.org/bibtex/259152c6aa338fcc8cb0be78a58259594/ijant},
doi = {10.5121/jant.2017.3301},
file = {Electronic Version:1900-99/Bainbridge83automatica.pdf:PDF},
groups = {public},
identifier = {DOI},
interhash = {427152504de9b50babc7c6f9b3964635},
intrahash = {59152c6aa338fcc8cb0be78a58259594},
issn = {2455- 7897},
journal = {International Journal of Antennas (JANT) },
keywords = {Antenna Co-axial Microstrip Patch Pattern VSWR adiation feed},
month = {july},
number = {1/2/3},
pages = {1-12},
timestamp = {2024-05-07T07:44:23.000+0200},
title = {DESIGN AND DEVELOPMENT OF MICROSTRIP
PATCH ANTENNA },
url = {https://airccse.com/jant/papers/3317jant01.pdf},
username = {flint63},
volume = 3,
year = 2017
}