MODELLING, ANALYSIS AND SIMULATION OF THE PIEZOELECTRIC MICRO PUMP
, и .
Advances in Engineering: an International Journal (ADEIJ) 2 (4): 01-09 (октября 2019)

The piezoelectricity is a reversible phenomenon, which corresponds to the direct piezoelectric effect. So that, the battery loads arrive at the pump, an electronic module must be established in the circuit. A flow pump must be used and its effectiveness must be evaluated according to the desired need. The system is conceived around 24 hour old clock which can be programmed to provide fluid in variable quantity on a regular basis. The piezo-hydraulic pump presented in this work is composed mainly of shareholder piezoelectric with two valves and a diaphragm of the room reinforced by a hard disk. This one is used to improve the performance of the micro-pump in forecast of pump realization. Modeling, analysis and simulation are carried out under SYMBOLS software.
  • @adeij_journal
К этой публикации ещё не было создано рецензий.

распределение оценок
средняя оценка пользователей0,0 из 5.0 на основе 0 рецензий
    Пожалуйста, войдите в систему, чтобы принять участие в дискуссии (добавить собственные рецензию, или комментарий)