Open USB block device using gdisk /dev/sdc, configure it as GPT and create Microsoft basic data partition (code 0700), then write changes and quit (Next steps will destroy partition table in your USB drive!!!).
sudo gdisk /dev/sdc
o
> This option deletes all partitions and creates a new protective MBR.
> Proceed? (Y/N): y
n
> Partition number ... > hit Enter
> First sector ... : > hit Enter
> Last sector ... : > hit Enter
> Current type is 'Linux filesystem'
> Hex code or GUID (L to show codes, Enter = 8300): 0700
p
> Should print something like:
> Disk /dev/sdc: 15646720 sectors, 7.5 GiB
> Model: DataTraveler 160
> Sector size (logical/physical): 512/512 bytes
> Disk identifier (GUID): ...
> Partition table holds up to 128 entries
> Main partition table begins at sector 2 and ends at sector 33
> First usable sector is 34, last usable sector is 15646686
> Partitions will be aligned on 2048-sector boundaries
> Total free space is 2014 sectors (1007.0 KiB)
> Number Start (sector) End (sector) Size Code Name
> 1 2048 15646686 7.5 GiB 0700 Microsoft basic data
w
> Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING PARTITIONS!!
> Do you want to proceed? (Y/N): y
q
Format new partition as NTFS:
sudo mkfs.ntfs /dev/sdc1
Mount new USB partition to temporary directory in your home:
mkdir ~/tmp-win10-usb-drive
sudo mount /dev/sdc1 ~/tmp-win10-usb-drive
Download Windows installation ISO, create new temporary directory in your home and mount it there:
mkdir ~/tmp-win10-iso-mnt
sudo mount Win10_1809Oct_English_x64.iso ~/tmp-win10-iso-mnt
Copy all files from mounted ISO to USB drive (you can use rsync to see progress):
sudo cp -rT ~/tmp-win10-iso-mnt/ ~/tmp-win10-usb-drive/`
Unmount Windows ISO and USB drive and remove temporary directories:
sudo umount ~/tmp-win10-iso-mnt/ ~/tmp-win10-usb-drive/
rmdir ~/tmp-win10-iso-mnt/ ~/tmp-win10-usb-drive/
Insert USB drive to new computer and boot from it.
Hinweis bei Flashload ueber USB: Klemmen Sie alle weiterenUSB Geraete ab. Alle anderen Programme beenden. Wenn dieAnlage in den Downloadzustand übergeht, wird sie von Windowsals neue Hardwarekomponente erkannt und derHardwareassistent startet daher. Wenn nach derDatei "ULISA.SYS" gefragt wird, navigieren Sie in ihrWindows-Systemverzeichnis, von dort in dasUnterverzeichnis "system32" und dann nach "drivers", wo sichdie gesuchte Datei befindet. Dieser Pfad gilt für Windows2000/XP. Unter Windows 98/ME gehen Sie in dasUnterverzeichnis "system".
Need a boot disk for your Windows machine? There are essentially seven steps to create a bootable DVD or bootable UFD (USB Flash Drive), all of which are command line based, this article tries to simplify all the information needed
Hinweis bei Flashload ueber USB: Klemmen Sie alle weiteren
USB Geraete ab. Alle anderen Programme beenden. Wenn die
Anlage in den Downloadzustand übergeht, wird sie von Windows
als neue Hardwarekomponente erkannt und der
Hardwareassistent startet daher. Wenn nach der
Datei "ULISA.SYS" gefragt wird, navigieren Sie in ihr
Windows-Systemverzeichnis, von dort in das
Unterverzeichnis "system32" und dann nach "drivers", wo sich
die gesuchte Datei befindet. Dieser Pfad gilt für Windows
2000/XP. Unter Windows 98/ME gehen Sie in das
Unterverzeichnis "system".
UNetbootin allows you to create bootable Live USB drives for a variety of Linux distributions from Windows or Linux, without requiring you to burn a CD. You can either let it download one of the many distributions supported out-of-the-box for you, or supply your own Linux .iso file if you've already downloaded one or your preferred distribution isn't on the list.