Numerical and experimental stress and failure studies are performed on metal/fibreglass-reinforced-plastic (GRP) joints used in
composite electrical insulators consisting of an epoxy tube reinforced with E-glass fibres and of two aluminium fittings fastened to
the tube with an adhesive. Subjected to traction and bending, the joints are modelled with axisymmetric 2D and solid 3D finite
elements respectively. Numerical stress and strain distributions through the bond are calculated and the damage initiation in the
composite is highlighted. The simulations are compared to experimental data obtained from several joint specimens tested on an
experimental set-up equipped with strain gauges and an acoustic emission system. Good correlation between the numerical predictions
and the experimental results is found.
%0 Journal Article
%1 bonhote2004stress
%A Bonhote, Philippe
%A Gmur, Thomas
%A Botsis, John
%A Papailiou, Konstantin O.
%D 2004
%J Composite Structures
%K Acoustic Composite Insulator Metal-composite Numerical Tubular analysis emission joints
%P 359-367
%T Stress and damage analysis of composite-aluminium joints used
in electrical insulators subject to traction and bending
%V 64
%X Numerical and experimental stress and failure studies are performed on metal/fibreglass-reinforced-plastic (GRP) joints used in
composite electrical insulators consisting of an epoxy tube reinforced with E-glass fibres and of two aluminium fittings fastened to
the tube with an adhesive. Subjected to traction and bending, the joints are modelled with axisymmetric 2D and solid 3D finite
elements respectively. Numerical stress and strain distributions through the bond are calculated and the damage initiation in the
composite is highlighted. The simulations are compared to experimental data obtained from several joint specimens tested on an
experimental set-up equipped with strain gauges and an acoustic emission system. Good correlation between the numerical predictions
and the experimental results is found.
@article{bonhote2004stress,
abstract = {Numerical and experimental stress and failure studies are performed on metal/fibreglass-reinforced-plastic (GRP) joints used in
composite electrical insulators consisting of an epoxy tube reinforced with E-glass fibres and of two aluminium fittings fastened to
the tube with an adhesive. Subjected to traction and bending, the joints are modelled with axisymmetric 2D and solid 3D finite
elements respectively. Numerical stress and strain distributions through the bond are calculated and the damage initiation in the
composite is highlighted. The simulations are compared to experimental data obtained from several joint specimens tested on an
experimental set-up equipped with strain gauges and an acoustic emission system. Good correlation between the numerical predictions
and the experimental results is found.},
added-at = {2021-03-03T23:45:14.000+0100},
author = {Bonhote, Philippe and Gmur, Thomas and Botsis, John and Papailiou, Konstantin O.},
biburl = {https://www.bibsonomy.org/bibtex/28ced4466b6a83d52fc5c1d487087a60a/ceps},
interhash = {623e12922f7298c14018c2d531f8d7bd},
intrahash = {8ced4466b6a83d52fc5c1d487087a60a},
journal = {Composite Structures},
keywords = {Acoustic Composite Insulator Metal-composite Numerical Tubular analysis emission joints},
pages = {359-367},
timestamp = {2023-12-21T08:23:14.000+0100},
title = {Stress and damage analysis of composite-aluminium joints used
in electrical insulators subject to traction and bending},
volume = 64,
year = 2004
}