Аннотация
Triaxial compressive tests have been conducted on CYMAT closed-cell
aluminium foams of five different relative densities to investigate
their initial failure surfaces under multiaxial loading. Quasi-static
uniaxial compressive and tensile tests have also been performed to
obtain their uniaxial strength. The experimentally measured yield
surfaces are compared with various published phenomenological yield
surface models. Reasonable agreement has been observed when suitable
Poisson's ratios are employed. Triaxial compressive tests have been
carried out on foams with nominal relative density of 17%at various
axial loading velocities to study the effect of strain rate on the
initial failure surface. The results showed that the initial yield
stresses of CYMAT closed-cell aluminium foams are not sensitive to
the axial strain rate ranged from 10-4 to 10+1 s-1.
Пользователи данного ресурса
Пожалуйста,
войдите в систему, чтобы принять участие в дискуссии (добавить собственные рецензию, или комментарий)