%0 Journal Article %1 tartakovsky2008 %A Tartakovsky, A. M. %A Redden, G. %A Lichtner, P. C. %A Scheibe, T. D. %A Meakin, P. %D 2008 %I American Geophysical Union %J WATER RESOURCES RESEARCH %K 2008 Experimental-study Mixing-induced analysis multiscale numerical precipitation %P 1-19 %T Mixing-induced precipitation: Experimental study and multiscale numerical analysis %U http://dx.doi.org/10.1029/2006WR005725 %V 44 %X Laboratory experiments, pore-scale simulations, and continuum (Darcy) -scale simulations were used to study mixing-induced precipitation in porous media. In the experimental investigation, solutions containing Na2CO3 and CaCl2 were each injected in different halves of a quasi two-dimensional flow cell filled with quartz sand. As a result of the in situ mixing between the two solutions, a narrow calcite precipitate layer (less than 5 mm wide) of more or less uniform width was formed between the individual solutions. Pore-scale simulations were conducted to help understand the mechanism of precipitation layer formation. The effect of the Peclet number, Pe, and the Damköhler number, Da, on mixing induced precipitation was also investigated. Pore-scale simulations revealed the presence of large pore-scale concentration gradients. This, and the presence of features, such as the precipitation layer, with characteristic lengths on the order of the average sand grain diameter, indicate the absence of a clear scale separation required for the strict derivation of Darcy-scale advection-dispersion equations. Nevertheless, we found that an adaptive high-resolution model based on advection-dispersion equations with grid sizes in the mixing zone smaller than the size of the sand grains can qualitatively reproduce the essential features of the experiment. As an alternative to computationally expensive high-resolution simulations, we proposed new forms for the homogeneous and heterogeneous reaction terms in Darcy-scale advection dispersion equations. These terms involve transport and mixing indices that account for highly nonuniform pore-scale concentration distributions and highly localized reactions. The proposed model accurately estimates the changes in solute concentrations due to homogenous and heterogeneous reactions during precipitation of minerals, observed in the pore-scale simulations, while conventional low-resolution advective-dispersion equations produced erroneous results.

@article{tartakovsky2008, abstract = {Laboratory experiments, pore-scale simulations, and continuum (Darcy) -scale simulations were used to study mixing-induced precipitation in porous media. In the experimental investigation, solutions containing Na2CO3 and CaCl2 were each injected in different halves of a quasi two-dimensional flow cell filled with quartz sand. As a result of the in situ mixing between the two solutions, a narrow calcite precipitate layer (less than 5 mm wide) of more or less uniform width was formed between the individual solutions. Pore-scale simulations were conducted to help understand the mechanism of precipitation layer formation. The effect of the Peclet number, Pe, and the Damköhler number, Da, on mixing induced precipitation was also investigated. Pore-scale simulations revealed the presence of large pore-scale concentration gradients. This, and the presence of features, such as the precipitation layer, with characteristic lengths on the order of the average sand grain diameter, indicate the absence of a clear scale separation required for the strict derivation of Darcy-scale advection-dispersion equations. Nevertheless, we found that an adaptive high-resolution model based on advection-dispersion equations with grid sizes in the mixing zone smaller than the size of the sand grains can qualitatively reproduce the essential features of the experiment. As an alternative to computationally expensive high-resolution simulations, we proposed new forms for the homogeneous and heterogeneous reaction terms in Darcy-scale advection dispersion equations. These terms involve transport and mixing indices that account for highly nonuniform pore-scale concentration distributions and highly localized reactions. The proposed model accurately estimates the changes in solute concentrations due to homogenous and heterogeneous reactions during precipitation of minerals, observed in the pore-scale simulations, while conventional low-resolution advective-dispersion equations produced erroneous results.}, added-at = {2009-10-15T17:40:48.000+0200}, author = {Tartakovsky, A. M. and Redden, G. and Lichtner, P. C. and Scheibe, T. D. and Meakin, P.}, biburl = {https://www.bibsonomy.org/bibtex/2c574bd8ac8e887a81b0bfd31c1a5a949/schepers}, description = {Mixing-induced precipitation: Experimental study and multiscale numerical analysis}, interhash = {9e5669ec57d996e1bf7508032a795f8a}, intrahash = {c574bd8ac8e887a81b0bfd31c1a5a949}, journal = {WATER RESOURCES RESEARCH}, keywords = {2008 Experimental-study Mixing-induced analysis multiscale numerical precipitation}, month = {#jun#}, pages = {1-19}, publisher = {American Geophysical Union}, timestamp = {2009-10-15T17:40:49.000+0200}, title = {Mixing-induced precipitation: Experimental study and multiscale numerical analysis}, url = {http://dx.doi.org/10.1029/2006WR005725}, volume = 44, year = 2008 }