Multipass Plate Heat Exchangers---Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements
S. Kandlikar, and R. Shah. Journal of Heat Transfer, 111 (2):
300 - 313(May 1989)
Abstract
Plate heat exchangers are classified on the basis of number of passes on each side and the flow arrangement in each channel, taking into account the end plate effects. This results in four configurations each for the 1-1 (1 Pass-1 Pass), 2-1, 2-2, 3-3, 4-1, 4-2, and 4-4 arrangements, and six configurations for the 3-1 arrangement. These arrangements are analyzed using the Gauss-Seidel iterative finite difference method; the plate arrangement that yields the highest effectiveness in each pass configuration is identified. Comprehensive results are presented in tabular form for the temperature effectiveness Psub 1 and log-mean temperature difference correction factor F as functions of the number of transfer units NTUsub 1, the heat capacity rate ratio Rsub 1, and the total number of thermal plates. On the basis of these results, specific guidelines are outlined for the selection of appropriate plate heat exchanger configurations.
%0 Journal Article
%1 kandlikar1989
%A Kandlikar, S. G.
%A Shah, R. K.
%D 1989
%J Journal of Heat Transfer
%K design effectiveness-NTU heat-exchanger
%N 2
%P 300 - 313
%T Multipass Plate Heat Exchangers---Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements
%U http://dx.doi.org/10.1115/1.3250678
%V 111
%X Plate heat exchangers are classified on the basis of number of passes on each side and the flow arrangement in each channel, taking into account the end plate effects. This results in four configurations each for the 1-1 (1 Pass-1 Pass), 2-1, 2-2, 3-3, 4-1, 4-2, and 4-4 arrangements, and six configurations for the 3-1 arrangement. These arrangements are analyzed using the Gauss-Seidel iterative finite difference method; the plate arrangement that yields the highest effectiveness in each pass configuration is identified. Comprehensive results are presented in tabular form for the temperature effectiveness Psub 1 and log-mean temperature difference correction factor F as functions of the number of transfer units NTUsub 1, the heat capacity rate ratio Rsub 1, and the total number of thermal plates. On the basis of these results, specific guidelines are outlined for the selection of appropriate plate heat exchanger configurations.
@article{kandlikar1989,
abstract = {Plate heat exchangers are classified on the basis of number of passes on each side and the flow arrangement in each channel, taking into account the end plate effects. This results in four configurations each for the 1-1 (1 Pass-1 Pass), 2-1, 2-2, 3-3, 4-1, 4-2, and 4-4 arrangements, and six configurations for the 3-1 arrangement. These arrangements are analyzed using the Gauss-Seidel iterative finite difference method; the plate arrangement that yields the highest effectiveness in each pass configuration is identified. Comprehensive results are presented in tabular form for the temperature effectiveness Psub 1 and log-mean temperature difference correction factor F as functions of the number of transfer units NTUsub 1, the heat capacity rate ratio Rsub 1, and the total number of thermal plates. On the basis of these results, specific guidelines are outlined for the selection of appropriate plate heat exchanger configurations.},
added-at = {2016-10-06T16:51:53.000+0200},
author = {Kandlikar, S. G. and Shah, R. K.},
biburl = {https://www.bibsonomy.org/bibtex/27e6ff1752e9574b8aa931679cdb0333f/jrdn},
interhash = {045db685c364026abbbb3a500883ed6d},
intrahash = {7e6ff1752e9574b8aa931679cdb0333f},
journal = {Journal of Heat Transfer},
keywords = {design effectiveness-NTU heat-exchanger},
month = may,
number = 2,
pages = {300 - 313},
timestamp = {2016-10-06T16:52:24.000+0200},
title = {Multipass Plate Heat Exchangers---Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements},
url = {http://dx.doi.org/10.1115/1.3250678},
volume = 111,
year = 1989
}